برجسته کردن:
,
, disc bowl centrifuge
Liquid Chlorella Disc Stack Centrifuges Concentration Equipment For Algae 2 Phase
Liquid Chlorella Disc Stack Centrifuges Concentration Equipment Algae Machine
Brief introduction
Model PDSM20000-CN separator is mainly used to remove water and algae such as Spirulina,green algae etc, which is very fine even can not be visible by eye. With high G-force during the running, the separator could get the concentration liquid with algae about 10%.
The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.The sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
The design, product and acceptance are conformed to the standard of GB/T5745 “Disc Separator”.
Separation theorem:
The mixture fluid to be processed are fed to the bowl from feeding pipe, under the effects of centrifugal force, he solids which has heavier density collects on the bowl wall .it include jams and impurities, collected in sediment holding space. After a while, the separated soilds are ejected from the bowl at controlling of control box. the intervals at which de-slugging have to take place depend on the quality of the mixture fluid. De-slugging include automatic de-slugging, total de-slugging, partial de-slugging.
Normally customer don't need total de-slugging, put up partial de-slugging under the condition of effects of automatic de-slugging are bad, the interval between two partial de-slugging is up to two minutes, and electric current is normal. Then re-establish the automatic de-slugging interval. The lighter products (lower density) flow along the inner side of the discs into the passage in the upper distributor, the lighter product is discharged from the machine by the centrifugal pump. Thus the mixture fluid is separated well, the centrifuge adopts self de-slugging and centripetal pump. Thus the machine can work continuously for a long time, attain good separation effects in long run.
Main technical parameters
| Model |
Capacity
(L/h)
|
Motor power
(Kw)
|
Discharging type |
Output pressure of clear liquid
(Mpa)
|
Net weight
(Kgs)
|
Overall dimension
L × W × H (mm)
|
| PDSM20000-CN |
20000 |
22 |
Variable capacity discharging |
≤0.2 |
1580 |
1479 × 1289 × 1583 |
Installation Notice
1. When install the separator, make sure there is enough space around the machine for its maintenance and repairing.
2. The operation water of the separator must be soft water, the pressure of which is between 0.025MPa and 0.03MPa.
3. All the pipes connecting with separator should be flexible.
4. The foundation must be firm,plan and leveling.
Reference Drawing
Guarantee
Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to reward you with a better quality in return for our interest in and faith toward. We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.
پیام شما باید بین 20 تا 3000 کاراکتر باشد!
